For people, nothing is more frustrating than switching on an air conditioner for a cool breeze on a very hot day and finding nothing but warm air being blown into the room. Having a malfunctioning air conditioning unit becomes a major hassle if you rely on your AC daily for comfort or just to get through one of those extremely hot seasons. Provided that an air conditioner is not cooling as intended, a few possible reasons could lie behind that. Visit https://www.lsairconservicing.sg/appointment/ to hire trained professionals for AC repair and to learn about the most common causes behind air conditioner cooling problems, intertwined with some practical troubleshooting tips, and the decision to call for the professionals.
- ThermostatIssues
The first step is to check the settings of the thermostat from the remote. Sometimes, the thermostat is set to “fan” instead of “cool” and the AC starts delivering room temperature air. When this happens, it would not cool the air. Also, ensure that the temperature is set below the actual room temperature. If the thermostat does not respond when pressed or is reading incorrect values, it could mean that either the internal sensor is faulty and needs calibration or replacement. Visit www.lsairconservicing.sg/ to get guidance regarding thermostat issues.
- Dirty Air Filters
Blocked air filters or clogged air filters will restrict the airflow and cause your air-conditioning unit to cool less effectively, and even freeze sometimes. This would probably mean that there is no proper circulation of the cooled air, which could result in your room still feeling warm. Manufacturers advise that you check and replace your air filters variously every 1-3 months. Clean filters not only improve the efficiency of cooling but also improve the quality of indoor air.
- Refrigerant Leakage or Low Refrigerant Levels
Refrigerant is blood for the AC system; it absorbs heat from the inside of your house and throws it out. If there is any leakage or even if the refrigerant level is less than the perfect amount, the air cannot be effectively cooled by the AC. Refrigerant issues can be diagnosed with hissing noises, icy coils, or a cycle that runs longer than normal. Refrigerant-handling requires a licensed technician; hence, the professionals should be contacted for any leak inquiry.
- Dirty or Blocked Condenser Unit
The outdoor condenser unit plays a vital role in releasing heat from your house. It cannot perform its job properly if it is covered with dirt, leaves or debris. Blockings or a dirty coil would prevent heat dissipation and cause the unit to work poorly to cool your space. Cleaning the area around the condenser and washing the coils with a hose while the power is off should help improve its efficiency.
- 5. Unsealed Ductwork
Even when your air conditioner operates perfectly, an open ductwork system could leak cool air before reaching the area you want to cool. Poor insulation and unsealed joints can contribute to the waste of energy and ineffective cooling. A duct professional will identify these issues, seal, and insulate your ducts for optimum performance.
Conclusion
When the air conditioning goes warm, not necessarily mean will require a new unit will be required. Usually, the cause can easily be traced to something as simple as a dirty filter, faulty settings or minor interrupters. But some issues, such as leaking refrigerants and a broken compressor will need an expert’s assistance. Periodic maintenance of the air conditioner and quick repairs will help keep your AC running smoothly. Without technical know-how regarding the source of the problem it would be best to call a good HVAC technician to prevent further damage and costly repairs.
